diff --git a/dotfiles/dot_config/niri/config.kdl b/dotfiles/dot_config/niri/config.kdl
new file mode 100644
index 0000000..dffa374
--- /dev/null
+++ b/dotfiles/dot_config/niri/config.kdl
@@ -0,0 +1,509 @@
+// This config is in the KDL format: https://kdl.dev
+// "/-" comments out the following node.
+// Check the wiki for a full description of the configuration:
+// https://github.com/YaLTeR/niri/wiki/Configuration:-Overview
+
+// Input device configuration.
+// Find the full list of options on the wiki:
+// https://github.com/YaLTeR/niri/wiki/Configuration:-Input
+input {
+    keyboard {
+        xkb {
+            // You can set rules, model, layout, variant and options.
+            // For more information, see xkeyboard-config(7).
+
+            // For example:
+            // layout "us,ru"
+            // options "grp:win_space_toggle,compose:ralt,ctrl:nocaps"
+        }
+    }
+
+    // Next sections include libinput settings.
+    // Omitting settings disables them, or leaves them at their default values.
+    touchpad {
+        // off
+        tap
+        // dwt
+        // dwtp
+        natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "two-finger"
+        // disabled-on-external-mouse
+    }
+
+    mouse {
+        // off
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "no-scroll"
+    }
+
+    trackpoint {
+        // off
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "on-button-down"
+        // scroll-button 273
+        // middle-emulation
+    }
+
+    // Uncomment this to make the mouse warp to the center of newly focused windows.
+    // warp-mouse-to-focus
+
+    // Focus windows and outputs automatically when moving the mouse into them.
+    // Setting max-scroll-amount="0%" makes it work only on windows already fully on screen.
+    // focus-follows-mouse max-scroll-amount="0%"
+}
+
+// You can configure outputs by their name, which you can find
+// by running `niri msg outputs` while inside a niri instance.
+// The built-in laptop monitor is usually called "eDP-1".
+// Find more information on the wiki:
+// https://github.com/YaLTeR/niri/wiki/Configuration:-Outputs
+// Remember to uncomment the node by removing "/-"!
+output "eDP-1" {
+    // Uncomment this line to disable this output.
+    // off
+
+    // Resolution and, optionally, refresh rate of the output.
+    // The format is "<width>x<height>" or "<width>x<height>@<refresh rate>".
+    // If the refresh rate is omitted, niri will pick the highest refresh rate
+    // for the resolution.
+    // If the mode is omitted altogether or is invalid, niri will pick one automatically.
+    // Run `niri msg outputs` while inside a niri instance to list all outputs and their modes.
+    mode "2560x1600@240.00"
+
+    // You can use integer or fractional scale, for example use 1.5 for 150% scale.
+    scale 1.5
+
+    // Transform allows to rotate the output counter-clockwise, valid values are:
+    // normal, 90, 180, 270, flipped, flipped-90, flipped-180 and flipped-270.
+    transform "normal"
+
+    // Position of the output in the global coordinate space.
+    // This affects directional monitor actions like "focus-monitor-left", and cursor movement.
+    // The cursor can only move between directly adjacent outputs.
+    // Output scale and rotation has to be taken into account for positioning:
+    // outputs are sized in logical, or scaled, pixels.
+    // For example, a 3840×2160 output with scale 2.0 will have a logical size of 1920×1080,
+    // so to put another output directly adjacent to it on the right, set its x to 1920.
+    // If the position is unset or results in an overlap, the output is instead placed
+    // automatically.
+    // position x=1280 y=0
+}
+
+// Settings that influence how windows are positioned and sized.
+// Find more information on the wiki:
+// https://github.com/YaLTeR/niri/wiki/Configuration:-Layout
+layout {
+    // Set gaps around windows in logical pixels.
+    gaps 16
+
+    // When to center a column when changing focus, options are:
+    // - "never", default behavior, focusing an off-screen column will keep at the left
+    //   or right edge of the screen.
+    // - "always", the focused column will always be centered.
+    // - "on-overflow", focusing a column will center it if it doesn't fit
+    //   together with the previously focused column.
+    center-focused-column "never"
+
+    // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between.
+    preset-column-widths {
+        // Proportion sets the width as a fraction of the output width, taking gaps into account.
+        // For example, you can perfectly fit four windows sized "proportion 0.25" on an output.
+        // The default preset widths are 1/3, 1/2 and 2/3 of the output.
+        proportion 0.33333
+        proportion 0.5
+        proportion 0.66667
+
+        // Fixed sets the width in logical pixels exactly.
+        // fixed 1920
+    }
+
+    // You can also customize the heights that "switch-preset-window-height" (Mod+Shift+R) toggles between.
+    // preset-window-heights { }
+
+    // You can change the default width of the new windows.
+    default-column-width { proportion 0.5; }
+    // If you leave the brackets empty, the windows themselves will decide their initial width.
+    // default-column-width {}
+
+    // By default focus ring and border are rendered as a solid background rectangle
+    // behind windows. That is, they will show up through semitransparent windows.
+    // This is because windows using client-side decorations can have an arbitrary shape.
+    //
+    // If you don't like that, you should uncomment `prefer-no-csd` below.
+    // Niri will draw focus ring and border *around* windows that agree to omit their
+    // client-side decorations.
+    //
+    // Alternatively, you can override it with a window rule called
+    // `draw-border-with-background`.
+
+    // You can change how the focus ring looks.
+    focus-ring {
+        // Uncomment this line to disable the focus ring.
+        // off
+
+        // How many logical pixels the ring extends out from the windows.
+        width 2
+
+        // Colors can be set in a variety of ways:
+        // - CSS named colors: "red"
+        // - RGB hex: "#rgb", "#rgba", "#rrggbb", "#rrggbbaa"
+        // - CSS-like notation: "rgb(255, 127, 0)", rgba(), hsl() and a few others.
+
+        // Color of the ring on the active monitor.
+        active-color "#7fc8ff"
+
+        // Color of the ring on inactive monitors.
+        inactive-color "#505050"
+
+        // You can also use gradients. They take precedence over solid colors.
+        // Gradients are rendered the same as CSS linear-gradient(angle, from, to).
+        // The angle is the same as in linear-gradient, and is optional,
+        // defaulting to 180 (top-to-bottom gradient).
+        // You can use any CSS linear-gradient tool on the web to set these up.
+        // Changing the color space is also supported, check the wiki for more info.
+        //
+        // active-gradient from="#80c8ff" to="#bbddff" angle=45
+
+        // You can also color the gradient relative to the entire view
+        // of the workspace, rather than relative to just the window itself.
+        // To do that, set relative-to="workspace-view".
+        //
+        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
+    }
+
+    // You can also add a border. It's similar to the focus ring, but always visible.
+    border {
+        // The settings are the same as for the focus ring.
+        // If you enable the border, you probably want to disable the focus ring.
+        off
+
+        width 4
+        active-color "#ffc87f"
+        inactive-color "#505050"
+
+        // active-gradient from="#ffbb66" to="#ffc880" angle=45 relative-to="workspace-view"
+        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
+    }
+
+    // Struts shrink the area occupied by windows, similarly to layer-shell panels.
+    // You can think of them as a kind of outer gaps. They are set in logical pixels.
+    // Left and right struts will cause the next window to the side to always be visible.
+    // Top and bottom struts will simply add outer gaps in addition to the area occupied by
+    // layer-shell panels and regular gaps.
+    struts {
+        // left 64
+        // right 64
+        // top 64
+        // bottom 64
+    }
+}
+
+// Add lines like this to spawn processes at startup.
+// Note that running niri as a session supports xdg-desktop-autostart,
+// which may be more convenient to use.
+// See the binds section below for more spawn examples.
+// spawn-at-startup "alacritty" "-e" "fish"
+
+// Uncomment this line to ask the clients to omit their client-side decorations if possible.
+// If the client will specifically ask for CSD, the request will be honored.
+// Additionally, clients will be informed that they are tiled, removing some client-side rounded corners.
+// This option will also fix border/focus ring drawing behind some semitransparent windows.
+// After enabling or disabling this, you need to restart the apps for this to take effect.
+// prefer-no-csd
+
+// You can change the path where screenshots are saved.
+// A ~ at the front will be expanded to the home directory.
+// The path is formatted with strftime(3) to give you the screenshot date and time.
+screenshot-path "~/Pictures/Screenshots/Screenshot from %Y-%m-%d %H-%M-%S.png"
+
+// You can also set this to null to disable saving screenshots to disk.
+// screenshot-path null
+
+// Animation settings.
+// The wiki explains how to configure individual animations:
+// https://github.com/YaLTeR/niri/wiki/Configuration:-Animations
+animations {
+    // Uncomment to turn off all animations.
+    // off
+
+    // Slow down all animations by this factor. Values below 1 speed them up instead.
+    // slowdown 3.0
+}
+
+// Window rules let you adjust behavior for individual windows.
+// Find more information on the wiki:
+// https://github.com/YaLTeR/niri/wiki/Configuration:-Window-Rules
+
+// Work around WezTerm's initial configure bug
+// by setting an empty default-column-width.
+window-rule {
+    // This regular expression is intentionally made as specific as possible,
+    // since this is the default config, and we want no false positives.
+    // You can get away with just app-id="wezterm" if you want.
+    match app-id=r#"^org\.wezfurlong\.wezterm$"#
+    default-column-width {}
+}
+
+// Open the Firefox picture-in-picture player as floating by default.
+window-rule {
+    // This app-id regular expression will work for both:
+    // - host Firefox (app-id is "firefox")
+    // - Flatpak Firefox (app-id is "org.mozilla.firefox")
+    match app-id=r#"firefox$"# title="^Picture-in-Picture$"
+    open-floating true
+}
+
+// Example: block out two password managers from screen capture.
+// (This example rule is commented out with a "/-" in front.)
+/-window-rule {
+    match app-id=r#"^org\.keepassxc\.KeePassXC$"#
+    match app-id=r#"^org\.gnome\.World\.Secrets$"#
+
+    block-out-from "screen-capture"
+
+    // Use this instead if you want them visible on third-party screenshot tools.
+    // block-out-from "screencast"
+}
+
+// Example: enable rounded corners for all windows.
+// (This example rule is commented out with a "/-" in front.)
+/-window-rule {
+    geometry-corner-radius 12
+    clip-to-geometry true
+}
+
+binds {
+    // Keys consist of modifiers separated by + signs, followed by an XKB key name
+    // in the end. To find an XKB name for a particular key, you may use a program
+    // like wev.
+    //
+    // "Mod" is a special modifier equal to Super when running on a TTY, and to Alt
+    // when running as a winit window.
+    //
+    // Most actions that you can bind here can also be invoked programmatically with
+    // `niri msg action do-something`.
+
+    // Mod-Shift-/, which is usually the same as Mod-?,
+    // shows a list of important hotkeys.
+    Mod+Shift+Slash { show-hotkey-overlay; }
+
+    // Suggested binds for running programs: terminal, app launcher, screen locker.
+    Mod+T { spawn "wezterm"; }
+    Mod+D { spawn "fuzzel"; }
+    Super+Alt+L { spawn "swaylock"; }
+
+    // You can also use a shell. Do this if you need pipes, multiple commands, etc.
+    // Note: the entire command goes as a single argument in the end.
+    // Mod+T { spawn "bash" "-c" "notify-send hello && exec alacritty"; }
+
+    // Example volume keys mappings for PipeWire & WirePlumber.
+    // The allow-when-locked=true property makes them work even when the session is locked.
+    XF86AudioRaiseVolume allow-when-locked=true { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.1+"; }
+    XF86AudioLowerVolume allow-when-locked=true { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.1-"; }
+    XF86AudioMute        allow-when-locked=true { spawn "wpctl" "set-mute" "@DEFAULT_AUDIO_SINK@" "toggle"; }
+    XF86AudioMicMute     allow-when-locked=true { spawn "wpctl" "set-mute" "@DEFAULT_AUDIO_SOURCE@" "toggle"; }
+
+    Mod+Q { close-window; }
+
+    Mod+Left  { focus-column-left; }
+    Mod+Down  { focus-window-down; }
+    Mod+Up    { focus-window-up; }
+    Mod+Right { focus-column-right; }
+    Mod+H     { focus-column-left; }
+    Mod+J     { focus-window-down; }
+    Mod+K     { focus-window-up; }
+    Mod+L     { focus-column-right; }
+
+    Mod+Ctrl+Left  { move-column-left; }
+    Mod+Ctrl+Down  { move-window-down; }
+    Mod+Ctrl+Up    { move-window-up; }
+    Mod+Ctrl+Right { move-column-right; }
+    Mod+Ctrl+H     { move-column-left; }
+    Mod+Ctrl+J     { move-window-down; }
+    Mod+Ctrl+K     { move-window-up; }
+    Mod+Ctrl+L     { move-column-right; }
+
+    // Alternative commands that move across workspaces when reaching
+    // the first or last window in a column.
+    // Mod+J     { focus-window-or-workspace-down; }
+    // Mod+K     { focus-window-or-workspace-up; }
+    // Mod+Ctrl+J     { move-window-down-or-to-workspace-down; }
+    // Mod+Ctrl+K     { move-window-up-or-to-workspace-up; }
+
+    Mod+Home { focus-column-first; }
+    Mod+End  { focus-column-last; }
+    Mod+Ctrl+Home { move-column-to-first; }
+    Mod+Ctrl+End  { move-column-to-last; }
+
+    Mod+Shift+Left  { focus-monitor-left; }
+    Mod+Shift+Down  { focus-monitor-down; }
+    Mod+Shift+Up    { focus-monitor-up; }
+    Mod+Shift+Right { focus-monitor-right; }
+    Mod+Shift+H     { focus-monitor-left; }
+    Mod+Shift+J     { focus-monitor-down; }
+    Mod+Shift+K     { focus-monitor-up; }
+    Mod+Shift+L     { focus-monitor-right; }
+
+    Mod+Shift+Ctrl+Left  { move-column-to-monitor-left; }
+    Mod+Shift+Ctrl+Down  { move-column-to-monitor-down; }
+    Mod+Shift+Ctrl+Up    { move-column-to-monitor-up; }
+    Mod+Shift+Ctrl+Right { move-column-to-monitor-right; }
+    Mod+Shift+Ctrl+H     { move-column-to-monitor-left; }
+    Mod+Shift+Ctrl+J     { move-column-to-monitor-down; }
+    Mod+Shift+Ctrl+K     { move-column-to-monitor-up; }
+    Mod+Shift+Ctrl+L     { move-column-to-monitor-right; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Shift+Ctrl+Left  { move-window-to-monitor-left; }
+    // ...
+
+    // And you can also move a whole workspace to another monitor:
+    // Mod+Shift+Ctrl+Left  { move-workspace-to-monitor-left; }
+    // ...
+
+    Mod+Page_Down      { focus-workspace-down; }
+    Mod+Page_Up        { focus-workspace-up; }
+    Mod+U              { focus-workspace-down; }
+    Mod+I              { focus-workspace-up; }
+    Mod+Ctrl+Page_Down { move-column-to-workspace-down; }
+    Mod+Ctrl+Page_Up   { move-column-to-workspace-up; }
+    Mod+Ctrl+U         { move-column-to-workspace-down; }
+    Mod+Ctrl+I         { move-column-to-workspace-up; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Ctrl+Page_Down { move-window-to-workspace-down; }
+    // ...
+
+    Mod+Shift+Page_Down { move-workspace-down; }
+    Mod+Shift+Page_Up   { move-workspace-up; }
+    Mod+Shift+U         { move-workspace-down; }
+    Mod+Shift+I         { move-workspace-up; }
+
+    // You can bind mouse wheel scroll ticks using the following syntax.
+    // These binds will change direction based on the natural-scroll setting.
+    //
+    // To avoid scrolling through workspaces really fast, you can use
+    // the cooldown-ms property. The bind will be rate-limited to this value.
+    // You can set a cooldown on any bind, but it's most useful for the wheel.
+    Mod+WheelScrollDown      cooldown-ms=150 { focus-workspace-down; }
+    Mod+WheelScrollUp        cooldown-ms=150 { focus-workspace-up; }
+    Mod+Ctrl+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; }
+    Mod+Ctrl+WheelScrollUp   cooldown-ms=150 { move-column-to-workspace-up; }
+
+    Mod+WheelScrollRight      { focus-column-right; }
+    Mod+WheelScrollLeft       { focus-column-left; }
+    Mod+Ctrl+WheelScrollRight { move-column-right; }
+    Mod+Ctrl+WheelScrollLeft  { move-column-left; }
+
+    // Usually scrolling up and down with Shift in applications results in
+    // horizontal scrolling; these binds replicate that.
+    Mod+Shift+WheelScrollDown      { focus-column-right; }
+    Mod+Shift+WheelScrollUp        { focus-column-left; }
+    Mod+Ctrl+Shift+WheelScrollDown { move-column-right; }
+    Mod+Ctrl+Shift+WheelScrollUp   { move-column-left; }
+
+    // Similarly, you can bind touchpad scroll "ticks".
+    // Touchpad scrolling is continuous, so for these binds it is split into
+    // discrete intervals.
+    // These binds are also affected by touchpad's natural-scroll, so these
+    // example binds are "inverted", since we have natural-scroll enabled for
+    // touchpads by default.
+    // Mod+TouchpadScrollDown { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.02+"; }
+    // Mod+TouchpadScrollUp   { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.02-"; }
+
+    // You can refer to workspaces by index. However, keep in mind that
+    // niri is a dynamic workspace system, so these commands are kind of
+    // "best effort". Trying to refer to a workspace index bigger than
+    // the current workspace count will instead refer to the bottommost
+    // (empty) workspace.
+    //
+    // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on
+    // will all refer to the 3rd workspace.
+    Mod+1 { focus-workspace 1; }
+    Mod+2 { focus-workspace 2; }
+    Mod+3 { focus-workspace 3; }
+    Mod+4 { focus-workspace 4; }
+    Mod+5 { focus-workspace 5; }
+    Mod+6 { focus-workspace 6; }
+    Mod+7 { focus-workspace 7; }
+    Mod+8 { focus-workspace 8; }
+    Mod+9 { focus-workspace 9; }
+    Mod+Ctrl+1 { move-column-to-workspace 1; }
+    Mod+Ctrl+2 { move-column-to-workspace 2; }
+    Mod+Ctrl+3 { move-column-to-workspace 3; }
+    Mod+Ctrl+4 { move-column-to-workspace 4; }
+    Mod+Ctrl+5 { move-column-to-workspace 5; }
+    Mod+Ctrl+6 { move-column-to-workspace 6; }
+    Mod+Ctrl+7 { move-column-to-workspace 7; }
+    Mod+Ctrl+8 { move-column-to-workspace 8; }
+    Mod+Ctrl+9 { move-column-to-workspace 9; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Ctrl+1 { move-window-to-workspace 1; }
+
+    // Switches focus between the current and the previous workspace.
+    // Mod+Tab { focus-workspace-previous; }
+
+    // The following binds move the focused window in and out of a column.
+    // If the window is alone, they will consume it into the nearby column to the side.
+    // If the window is already in a column, they will expel it out.
+    Mod+BracketLeft  { consume-or-expel-window-left; }
+    Mod+BracketRight { consume-or-expel-window-right; }
+
+    // Consume one window from the right to the bottom of the focused column.
+    Mod+Comma  { consume-window-into-column; }
+    // Expel the bottom window from the focused column to the right.
+    Mod+Period { expel-window-from-column; }
+
+    Mod+R { switch-preset-column-width; }
+    Mod+Shift+R { switch-preset-window-height; }
+    Mod+Ctrl+R { reset-window-height; }
+    Mod+F { maximize-column; }
+    Mod+Shift+F { fullscreen-window; }
+    Mod+C { center-column; }
+
+    // Finer width adjustments.
+    // This command can also:
+    // * set width in pixels: "1000"
+    // * adjust width in pixels: "-5" or "+5"
+    // * set width as a percentage of screen width: "25%"
+    // * adjust width as a percentage of screen width: "-10%" or "+10%"
+    // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0,
+    // set-column-width "100" will make the column occupy 200 physical screen pixels.
+    Mod+Minus { set-column-width "-10%"; }
+    Mod+Equal { set-column-width "+10%"; }
+
+    // Finer height adjustments when in column with other windows.
+    Mod+Shift+Minus { set-window-height "-10%"; }
+    Mod+Shift+Equal { set-window-height "+10%"; }
+
+    // Move the focused window between the floating and the tiling layout.
+    Mod+V       { toggle-window-floating; }
+    Mod+Shift+V { switch-focus-between-floating-and-tiling; }
+
+    // Actions to switch layouts.
+    // Note: if you uncomment these, make sure you do NOT have
+    // a matching layout switch hotkey configured in xkb options above.
+    // Having both at once on the same hotkey will break the switching,
+    // since it will switch twice upon pressing the hotkey (once by xkb, once by niri).
+    // Mod+Space       { switch-layout "next"; }
+    // Mod+Shift+Space { switch-layout "prev"; }
+
+    Print { screenshot; }
+    Ctrl+Print { screenshot-screen; }
+    Alt+Print { screenshot-window; }
+
+    // The quit action will show a confirmation dialog to avoid accidental exits.
+    Mod+Shift+E { quit; }
+    Ctrl+Alt+Delete { quit; }
+
+    // Powers off the monitors. To turn them back on, do any input like
+    // moving the mouse or pressing any other key.
+    Mod+Shift+P { power-off-monitors; }
+}
diff --git a/dotfiles/dot_config/wezterm/wezterm.lua b/dotfiles/dot_config/wezterm/wezterm.lua
index 32bd2dd..3cbc72e 100644
--- a/dotfiles/dot_config/wezterm/wezterm.lua
+++ b/dotfiles/dot_config/wezterm/wezterm.lua
@@ -74,7 +74,7 @@ config.background = {
   }
 }
 
-config.window_decorations = "TITLE|RESIZE"
+-- config.window_decorations = "TITLE|RESIZE"
 
 config.window_padding = {
   left = 12,
diff --git a/flake.lock b/flake.lock
index 759c945..65cbbde 100644
--- a/flake.lock
+++ b/flake.lock
@@ -185,11 +185,11 @@
         "zig": "zig"
       },
       "locked": {
-        "lastModified": 1737517085,
-        "narHash": "sha256-A5w6+0Zc7b93nbCF6ayHbXIEO0+h+8BR4byYGgTy+tY=",
+        "lastModified": 1737779447,
+        "narHash": "sha256-+iVqQXAUJshUYgxOHfke54Ux4f/aggl1yub86KNx2tE=",
         "owner": "ghostty-org",
         "repo": "ghostty",
-        "rev": "ddf7173ae92b4992c4506b6df4681c0687cc29c3",
+        "rev": "71e62f96fa4d286eda835048428d5be96e9f87c1",
         "type": "github"
       },
       "original": {
@@ -263,11 +263,11 @@
         "nixpkgs": "nixpkgs_2"
       },
       "locked": {
-        "lastModified": 1737575492,
-        "narHash": "sha256-qa/D3NC1JoApnUuLrq1gseBmIxeg6icm/ojPgggMDVQ=",
+        "lastModified": 1737762889,
+        "narHash": "sha256-5HGG09bh/Yx0JA8wtBMAzt0HMCL1bYZ93x4IqzVExio=",
         "owner": "nix-community",
         "repo": "home-manager",
-        "rev": "cefb1889b96ddd1dac3dd4734e894f4cadab7802",
+        "rev": "daf04c5950b676f47a794300657f1d3d14c1a120",
         "type": "github"
       },
       "original": {
@@ -290,11 +290,11 @@
         "uv2nix": "uv2nix"
       },
       "locked": {
-        "lastModified": 1737544722,
-        "narHash": "sha256-XAWQdmd21BGeIkt3ngevgwJW2UJDF/tEu23jVIOTG9U=",
+        "lastModified": 1737828490,
+        "narHash": "sha256-V2uXWc2L25P4Dtfrlb0GMR3vqKclFaPieSz3lA6Z4G8=",
         "owner": "isd-project",
         "repo": "isd",
-        "rev": "3bd515e5ccce312d5ff7273afb93e7a775212925",
+        "rev": "591eb04e8d50576ae6dc7ea435664ccb52e82726",
         "type": "github"
       },
       "original": {
@@ -311,11 +311,11 @@
       },
       "locked": {
         "dir": "nix",
-        "lastModified": 1736192527,
-        "narHash": "sha256-s0nfy/exouiq6JdBiOhEvcfK1Nh8d/cVzYB67b36WPI=",
+        "lastModified": 1737820827,
+        "narHash": "sha256-PJ+X/Os2MDmaIjaplrmi5poTAiFpsq9TaXCvdUnSc/4=",
         "ref": "refs/heads/master",
-        "rev": "25de8837fdd89b5c70bb313188f7430fe29e0c42",
-        "revCount": 900,
+        "rev": "6bbd9181fc6d6f7e4b502988e7ad09a26d89f2a6",
+        "revCount": 906,
         "submodules": true,
         "type": "git",
         "url": "https://github.com/kmonad/kmonad?dir=nix"
@@ -401,11 +401,11 @@
     },
     "nix-flatpak": {
       "locked": {
-        "lastModified": 1736952876,
-        "narHash": "sha256-dJXuLP2CBkIG333L+Rb3e1D0oXHYbl0MgmKPGuvFuAI=",
+        "lastModified": 1737806078,
+        "narHash": "sha256-FjgNPBLMCpmwtJT5LiQYkM2lDY+yAmW1ZN1Idx7QeDg=",
         "owner": "gmodena",
         "repo": "nix-flatpak",
-        "rev": "b6966d5fa96b0fae99a4da0b5bdfbb0a75f5c058",
+        "rev": "83cc6a28afc4155fd3fe28274f6b5287f51ed2b6",
         "type": "github"
       },
       "original": {
@@ -416,11 +416,11 @@
     },
     "nixos-hardware": {
       "locked": {
-        "lastModified": 1737590910,
-        "narHash": "sha256-qM/y6Dtpu9Wmf5HqeZajQdn+cS0aljdYQQQnrvx+LJE=",
+        "lastModified": 1737751639,
+        "narHash": "sha256-ZEbOJ9iT72iwqXsiEMbEa8wWjyFvRA9Ugx8utmYbpz4=",
         "owner": "NixOS",
         "repo": "nixos-hardware",
-        "rev": "9368027715d8dde4b84c79c374948b5306fdd2db",
+        "rev": "dfad538f751a5aa5d4436d9781ab27a6128ec9d4",
         "type": "github"
       },
       "original": {
@@ -479,11 +479,11 @@
     },
     "nixpkgs-unstable_2": {
       "locked": {
-        "lastModified": 1737469691,
-        "narHash": "sha256-nmKOgAU48S41dTPIXAq0AHZSehWUn6ZPrUKijHAMmIk=",
+        "lastModified": 1737746512,
+        "narHash": "sha256-nU6AezEX4EuahTO1YopzueAXfjFfmCHylYEFCagduHU=",
         "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "9e4d5190a9482a1fb9d18adf0bdb83c6e506eaab",
+        "rev": "825479c345a7f806485b7f00dbe3abb50641b083",
         "type": "github"
       },
       "original": {
@@ -495,11 +495,11 @@
     },
     "nixpkgs_2": {
       "locked": {
-        "lastModified": 1736012469,
-        "narHash": "sha256-/qlNWm/IEVVH7GfgAIyP6EsVZI6zjAx1cV5zNyrs+rI=",
+        "lastModified": 1737469691,
+        "narHash": "sha256-nmKOgAU48S41dTPIXAq0AHZSehWUn6ZPrUKijHAMmIk=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "8f3e1f807051e32d8c95cd12b9b421623850a34d",
+        "rev": "9e4d5190a9482a1fb9d18adf0bdb83c6e506eaab",
         "type": "github"
       },
       "original": {
@@ -527,11 +527,11 @@
     },
     "nixpkgs_4": {
       "locked": {
-        "lastModified": 1737404927,
-        "narHash": "sha256-e1WgPJpIYbOuokjgylcsuoEUCB4Jl2rQXa2LUD6XAG8=",
+        "lastModified": 1737672001,
+        "narHash": "sha256-YnHJJ19wqmibLQdUeq9xzE6CjrMA568KN/lFPuSVs4I=",
         "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "ae584d90cbd0396a422289ee3efb1f1c9d141dc3",
+        "rev": "035f8c0853c2977b24ffc4d0a42c74f00b182cd8",
         "type": "github"
       },
       "original": {
@@ -826,11 +826,11 @@
       },
       "locked": {
         "dir": "nix",
-        "lastModified": 1737065773,
-        "narHash": "sha256-YPP/92ViF7zd3TAnQL65pIaYiNeyqjPA4JnO6l/Hn0s=",
+        "lastModified": 1737758457,
+        "narHash": "sha256-Z50/JcMQI2R9ttEd20gXEhuAXvAI0yp3bM7j6/Xoi+A=",
         "owner": "wez",
         "repo": "wezterm",
-        "rev": "6c443bee9a21b6d37e06227085ddcd9633529a69",
+        "rev": "4bf0007cefff7f1ad139d89b54f074d5ad7d2184",
         "type": "github"
       },
       "original": {
diff --git a/flake.nix b/flake.nix
index c28cab0..b535044 100644
--- a/flake.nix
+++ b/flake.nix
@@ -39,7 +39,6 @@
 
     ghostty = {
       url = "github:ghostty-org/ghostty";
-      # inputs.nixpkgs.follows = "nixpkgs";
     };
 
     affinity-nix = {
diff --git a/home/home.nix b/home/home.nix
index a862301..0b8784c 100644
--- a/home/home.nix
+++ b/home/home.nix
@@ -2,17 +2,13 @@
 {
 
   nixpkgs = {
-    # You can add overlays here
     overlays = [
-      # Add overlays your own flake exports (from overlays and pkgs dir):
       outputs.overlays.additions
       outputs.overlays.modifications
       outputs.overlays.unstable-packages
     ];
 
-    # Configure your nixpkgs instance
     config = {
-      # Disable if you don't want unfree packages
       allowUnfree = true;
     };
   };
@@ -24,9 +20,9 @@
       inputs.affinity-nix.packages.x86_64-linux.designer
 
       guix
-      uv
+      # uv
 
-      thonny
+      unstable.thonny
 
       inputs.isd.packages.x86_64-linux.default
 
@@ -125,6 +121,9 @@
         serapeum
       ]))
 
+      fuzzel
+
+      kdlfmt
       ccl
       racket
       gdu
@@ -281,13 +280,16 @@
       discord
       slack
       signal-desktop
+      eyedropper
       calcurse
       onlyoffice-desktopeditors
       libreoffice
       hyphenDicts.en_US
       plexamp
-      amberol
+      rmpc
+      resources
       carla
+      switcheroo
       # audacity
       tenacity
       supercollider-with-plugins
@@ -296,6 +298,7 @@
       blender
       davinci-resolve-studio
       steam
+      unstable.processing
       zotero
       jre
       tesseract
@@ -426,6 +429,9 @@
 
   programs = {
     home-manager.enable = true;
+    yambar = {
+      enable = true;
+    };
     direnv = {
       enable = true;
       nix-direnv.enable = true;
@@ -499,11 +505,11 @@
     thefuck = {
       enable = true;
     };
-    # ghostty = {
-    #   enable = true;
-    #   package =  inputs.ghostty.packages.x86_64-linux.ghostty;
-    #   enableFishIntegration = true;
-    # };
+    ghostty = {
+      enable = true;
+      package =  inputs.ghostty.packages.x86_64-linux.ghostty;
+      enableFishIntegration = true;
+    };
     wezterm = {
       enable = true;
       package = inputs.wezterm.packages.${pkgs.system}.default;
@@ -621,6 +627,13 @@
   };
 
   services = {
+    # mpd = {
+    #   enable = true;
+    #   # musicDirectory = ;
+    # };
+    mako = {
+      enable = true;
+    };
     flatpak.enable = true;
     syncthing = {
       enable = true;
@@ -691,10 +704,11 @@
   # moving files!
   xdg.configFile."just/justfile".source = ../dotfiles/dot_config/just/justfile;
   xdg.configFile."starship.toml".source = ../dotfiles/dot_config/starship.toml;
-  # xdg.configFile."ghostty".source = ../dotfiles/dot_config/ghostty;
+  xdg.configFile."ghostty".source = ../dotfiles/dot_config/ghostty;
   xdg.configFile."wezterm".source = ../dotfiles/dot_config/wezterm;
   xdg.configFile."git".source = ../dotfiles/dot_config/git;
   xdg.configFile."rbw".source = ../dotfiles/dot_config/rbw;
+  xdg.configFile."niri/config.kdl".source = ../dotfiles/dot_config/niri/config.kdl;
   home.file.".ssh/config".source = ../dotfiles/dot_ssh/config;
   home.file.".npmrc".source = ../dotfiles/dot_npmrc;
   home.file.".vst3/yabridge/yabridge.toml".source = ../dotfiles/dot_vst3/yabridge.toml;
diff --git a/overlays/default.nix b/overlays/default.nix
index 3f5233c..984d91f 100644
--- a/overlays/default.nix
+++ b/overlays/default.nix
@@ -3,10 +3,8 @@
   # This one brings our custom packages from the 'pkgs' directory
   additions = final: _prev: import ../packages final.pkgs;
 
-  # This one contains whatever you want to overlay
-  # You can change versions, add patches, set compilation flags, anything really.
-  # https://nixos.wiki/wiki/Overlays
   modifications = final: prev: {
+
     ulauncher = prev.ulauncher.overrideAttrs (old: {
       propagatedBuildInputs = with prev.python3Packages;
         old.propagatedBuildInputs
@@ -35,41 +33,55 @@
       patches = [""];
     });
 
-    # openrazer-daemon = prev.openrazer-daemon.overrideDerivation (previous: {
-	  #   # name = "openrazer-daemon";
-	  #   src = prev.fetchFromGitHub {
-	  #     owner = "openrazer";
-	  #     repo = "openrazer";
-	  #     hash = "sha256-GqmFpVNuPRNM95pJsihsk/d3s61t4Lw+qaukKip9BAM=";
-	  #     rev = "5e677b178be7da08fb72d7cd0791bf68a129fcc5";
-	  #   };
-	  # });
+    openrazer-daemon = prev.openrazer-daemon.overrideDerivation (previous: {
+	    # name = "openrazer-daemon";
+	    src = prev.fetchFromGitHub {
+	      owner = "openrazer";
+        version = "latest";
+	      repo = "openrazer";
+	      hash = "sha256-GqmFpVNuPRNM95pJsihsk/d3s61t4Lw+qaukKip9BAM=";
+	      rev = "5e677b178be7da08fb72d7cd0791bf68a129fcc5";
+	    };
+	  });
 
-    # python312 = prev.python312.override {
-    #   packageOverrides = pyself: pysuper: {
-    #     openrazer = pysuper.openrazer.overrideAttrs (_: {
-    #       src = prev.fetchFromGitHub {
-	  #         owner = "openrazer";
-	  #         repo = "openrazer";
-	  #         hash = "sha256-GqmFpVNuPRNM95pJsihsk/d3s61t4Lw+qaukKip9BAM=";
-	  #         rev = "5e677b178be7da08fb72d7cd0791bf68a129fcc5";
-	  #       };
-    #     });
-    #   };
-    # };
+    python312 = prev.python312.override {
+      packageOverrides = pyself: pysuper: {
+        openrazer = pysuper.openrazer.overrideAttrs (_: {
+          src = prev.fetchFromGitHub {
+	          owner = "openrazer";
+	          repo = "openrazer";
+	          hash = "sha256-GqmFpVNuPRNM95pJsihsk/d3s61t4Lw+qaukKip9BAM=";
+	          rev = "5e677b178be7da08fb72d7cd0791bf68a129fcc5";
+	        };
+        });
+      };
+    };
 
-    # python311 = prev.python311.override {
-    #   packageOverrides = pyself: pysuper: {
-    #     openrazer = pysuper.openrazer.overrideAttrs (_: {
-    #       src = prev.fetchFromGitHub {
-	  #         owner = "openrazer";
-	  #         repo = "openrazer";
-	  #         hash = "sha256-GqmFpVNuPRNM95pJsihsk/d3s61t4Lw+qaukKip9BAM=";
-	  #         rev = "5e677b178be7da08fb72d7cd0791bf68a129fcc5";
-	  #       };
-    #     });
-    #   };
-    # };
+    python311 = prev.python311.override {
+      packageOverrides = pyself: pysuper: {
+        openrazer = pysuper.openrazer.overrideAttrs (_: {
+          src = prev.fetchFromGitHub {
+            version = "latest";
+            owner = "openrazer";
+	          repo = "openrazer";
+	          hash = "sha256-GqmFpVNuPRNM95pJsihsk/d3s61t4Lw+qaukKip9BAM=";
+	          rev = "5e677b178be7da08fb72d7cd0791bf68a129fcc5";
+	        };
+        });
+      };
+    };
+
+    linuxPackages_6_12 = prev.linuxPackages_6_12.extend (lpf: lpp: {
+      openrazer = lpp.openrazer.overrideAttrs (_: {
+        src = prev.fetchFromGitHub {
+	        owner = "openrazer";
+	        repo = "openrazer";
+          version = "latest";
+	        hash = "sha256-GqmFpVNuPRNM95pJsihsk/d3s61t4Lw+qaukKip9BAM=";
+	        rev = "5e677b178be7da08fb72d7cd0791bf68a129fcc5";
+	      };
+      });
+    });
   };
 
   # When applied, the unstable nixpkgs set (declared in the flake inputs) will
diff --git a/packages/bitwig-beta/bitwig-studio-beta.nix b/packages/bitwig-beta/bitwig-studio-beta.nix
index 08d964e..cfd53c2 100644
--- a/packages/bitwig-beta/bitwig-studio-beta.nix
+++ b/packages/bitwig-beta/bitwig-studio-beta.nix
@@ -32,12 +32,12 @@
 
 stdenv.mkDerivation rec {
   pname = "bitwig-studio-unwrapped";
-  version = "5.3-beta-3";
+  version = "5.3-beta-6";
 
   src = fetchurl {
     name = "bitwig-studio-${version}.deb";
-    url = "https://downloads-secure.bitwig.com/5.3%20Beta%203/bitwig-studio-5.3-beta-3.deb?__token__=st=1734721071.0~exp=1734721671.0~hmac=b69ea20705e6b169a0dbc6a7944dcbc428f58d83dedb93b2cc81f5c0d173862a&source_url=/dl/Bitwig%20Studio/5.3%20Beta%203/installer_linux/";
-    sha256 = "sha256-3T1Jg+WgETi8nbmiqYNw/FylvF8LkIbAw+iEOjpbKqU=";
+    url = "https://downloads-secure.bitwig.com/5.3%20Beta%206/bitwig-studio-5.3-beta-6.deb?__token__=st=1737819113.0~exp=1737819713.0~hmac=4f89ac2fb395e08a914fe57eb46d2313b2d5288f981d0f7e2da9089325c4c099&source_url=/dl/Bitwig%20Studio/5.3%20Beta%206/installer_linux/";
+    sha256 = "sha256-DE5qWSAcOJHThAXdQouOVRkFNhuzZD9j8gphByaQEis=";
 
   };
 
diff --git a/system/eddie/configuration.nix b/system/eddie/configuration.nix
index f3cff5a..c36d8a5 100644
--- a/system/eddie/configuration.nix
+++ b/system/eddie/configuration.nix
@@ -60,7 +60,6 @@
     tailscale
     rsync
     gnupg
-    # openrazer-daemon
     clinfo
     alsa-utils
     psutils
@@ -72,12 +71,8 @@
     freetype
     egl-wayland
     glfw-wayland
-    # libGL.dev
     openssl
-    adi1090x-plymouth-themes
-    # solaar
-    # logitech-udev-rules
-    linuxKernel.packages.linux_6_13.openrazer
+    xwayland-satellite
   ];
 
   # Bootloader.
@@ -87,13 +82,7 @@
       systemd-boot.configurationLimit = 8;
       efi.canTouchEfiVariables = true;
     };
-    # plymouth = {
-    #   enable = true;
-    #   font = "${pkgs.jetbrains-mono}/share/fonts/truetype/JetBrainsMono-Medium.ttf";
-    #   themePackages = [ pkgs.adi1090x-plymouth-themes ];
-    #   theme = "deus_ex";
-    # };
-    kernelPackages = pkgs.linuxPackages_latest;
+    kernelPackages = pkgs.unstable.linuxPackages_6_12;
     initrd.kernelModules = [ "nvidia" "nvidia_modeset" "nvidia_uvm" "nvidia_drm" "snd-virmidi" ];
     kernelParams = [ "nvidia_drm.fbdev=1" "nvidia_drm.modeset=1" ];
   };
@@ -223,6 +212,9 @@
     vSync = true;
   };
 
+  programs.niri.enable = true;
+  # programs.waybar.enable = true;
+
   programs.nh = {
     enable = true;
     clean = {
@@ -255,11 +247,14 @@
 
   services.gnome.sushi.enable = true;
 
-  xdg.portal.extraPortals = [
-    pkgs.xdg-desktop-portal-gnome
-    pkgs.xdg-desktop-portal-gtk
-    pkgs.xdg-desktop-portal
-  ];
+  xdg.portal = {
+    enable = true;
+    extraPortals = [
+      pkgs.xdg-desktop-portal-gnome
+      pkgs.xdg-desktop-portal-gtk
+      pkgs.xdg-desktop-portal
+    ];
+  };
 
   # Enable sound with pipewire.
   hardware.pulseaudio.enable = false;