Introduces a system to announce what execution contexts are active, so I
can react appropriately, emit more helpful logs/warnings in the case of
issues, and throw more meaningful errors.
* bin/doom: load module CLIs in the 'modules' context.
* lisp/cli/doctor.el: load package files in 'packages' context.
* lisp/doom-cli.el:
- (doom-before-init-hook, doom-after-init-hook): trigger hooks at the
correct time. This may increase startup load time, as the benchmark
now times more of the startup process.
- (doom-cli-execute, doom-cli-context-execute,
doom-cli-context-restore, doom-cli-context-parse,
doom-cli--output-benchmark-h, doom-cli-call, doom-cli--restart,
doom-cli-load, run!): remove redundant context prefix in debug logs,
it's now redundant with doom-context, which doom-log now prefixes
them with.
* lisp/doom-lib.el (doom-log): prefix doom-context to doom-log output,
unless it starts with :.
* lisp/doom-packages.el (package!, doom-packages--read): throw error if
not used in a packages.el file or in the context of our package
manager.
* lisp/doom-profiles.el (doom-profile--generate-init-vars,
doom-profile--generate-load-modules): use modules doom-context instead
of doom-init-time to detect startup.
* lisp/doom-start.el (doom-load-packages-incrementally-h): move function
closer to end of doom-after-init-hook.
* lisp/doom.el:
- (doom-before-init-hook, doom--set-initial-values-h,
doom--begin-init-h): rename doom--set-initial-values-h to
doom--begin-init-h and ensure it runs as late in
doom-before-init-hook as possible, as that is the point where Doom's
"initialization" formally begins.
- (doom-after-init-hook): don't trigger at the end of command-line-1
in non-interactive sessions. This will be triggered manually in
doom-cli.el's run!.
* lisp/lib/config.el (doom/reload, doom/reload-autoloads,
doom/reload-env): use 'reload' context for reload commands.
* modules/lang/emacs-lisp/autoload.el (+emacs-lisp-eval): use 'eval'
context.
* modules/lang/org/config.el: remove doom-reloading-p; check for
'reload' doom context instead.
* lisp/doom-cli.el:
- reference backport source commit.
- doom-cli--restart: a type check is all we need here. This is a
programmer error, not a user error.
* lisp/doom-editor.el (recentf): mention recentf-show-abbreviated (added in
emacs-mirror/emacs@32906819ad)
* lisp/doom-keybinds.el (doom-init-leader-keys-h): move to
doom-after-init-hook, in case the user customizes leader variables in
a previous hook (like emacs-startup-hook or after-init-hook).
* lisp/doom-start.el: use eval-when! to compile out the section on
non-macOS systems (when Doom gets around to compiling its core files,
later).
* modules/config/literate/autoload.el (+literate-config-file): use
file-name-concat instead of string concat. This relaxes the
requirement that doom-user-dir end in a /; a requirement I intend to
fully phase out.
* modules/lang/emacs-lisp/autoload.el (+emacs-lisp-non-package): remove
empty map! macro in flycheck-emacs-lisp-check-form. The macro already
no-ops at compile-time/in noninteractive sessions since b480ed51a3.
* modules/ui/hl-todo/config.el (hl-todo-keyword-faces): revise
commentary for default hl-todo keywords.
Ref: emacs-mirror/emacs@32906819ad
Ref: b480ed51a3
Due to $DOOMPROFILE being set to an empty string when persisting Doom
CLI sessions, which would affect any case where a CLI command restarts
the session (e.g. when the :config literate module tangles a config or
'doom --debug ...' restarts to set DEBUG=1).
Particularly DOOMPROFILE, without which the --profile switch wasn't
actually doing anything, and profile sessions would (silently) use the
default user-emacs-directory and doom-user-dir.
BREAKING CHANGE: This commit makes three breaking changes:
- Doom now fully and dynamically generates (and byte-compiles) your
profile and its init files, which includes your autoloads, loading
your init files and modules, and then some. This replaces
doom-initialize-modules, doom-initialize-core-modules, and
doom-module-loader, which have been removed. This has also improved
startup time by a bit, but if you use these functions in your CLIs,
for instance, this will be a breaking change.
- `doom sync` is now required for Doom to see your profiles (and must be
run whenever you change them, or when you up/downgrade Emacs across
major versions).
- $DOOMDIR/init.el is now read much earlier than it used to be. Before
any of doom-{ui,keybinds,editor,projects}, before any autoloads are
loaded, and before your load-path has been populated with your
packages. It now runs in the context of early-init.el, giving users
freer range over what they can affect, but a more minimalistic
environment to do it in.
If you must have some logic run when all that is set up, add it to one
of the module hooks added in e08f68b or 283308a.
This also poses a significant change to Doom's load order (see the
commentary change in lib/doom.el), along with the following (non
breaking) changes:
1. Adds a new `doom profiles sync` command. This will forcibly resync
your profiles, while `doom sync` will only do so if your profiles
have changed.
2. Doom now fully and dynamically generates (and byte-compiles) your
user-init-file, which includes loading all your init files, modules,
and custom-file. This replaces the job of doom-initialize-modules,
doom-initialize-core-modules, and doom-module-loader, which have been
removed. This has also improved startup time by a bit.
3. Defines new doom-state-dir variable, though not used yet (saving that
and the other breaking changes for the 3.0 release).
4. Redesigns profile directory variables (doom-profile-*-dir) to prepare
for future XDG-compliance.
5. Removed unused/unimportant profile variables in doom.el.
6. Added lisp/doom-profiles.el. It's hardly feature complete, but it's
enough to power the system as it is now.
7. Updates the "load order" commentary in doom.el to reflect these
changes.
doom-before-init-hook runs before $DOOMDIR/init.el is loaded.
doom-after-init-hook runs at the *very* end of the Emacs startup
process (after window-setup-hook).
This refactors how Doom captures and redirects its output (to stdout and
stderr) into a more general with-output-to! macro, and:
- Simplifies the "print level" system. The various doom-print-*-level
variables have been removed.
- Adds a new print level: notice, which will be the default level for
all standard output (from print!, doom-print, prin[ct1], etc).
- Adds a with-output-to! macro for capturing and redirecting
output to multiple streams (without suppressing it from stdout). It
can also be nested.
- Changes the following about doom-print:
- Default :format changed to nil (was t)
- Default :level changed to t (was `doom-print-level`)
- No longer no-ops if OUTPUT is only whitespace
This commit reduces the debug log noise, makes it easier to
read/parse/search, and soft-introduces a convention for doom-log
messages, where they are prefixed with a unique identifier loosely named
after it's running context or calling function.
I haven't enforced it everywhere doom-log is used yet, but this is a
start.
BREAKING CHANGE: If anyone is using Doom's CLI framework and are
defining their own CLIs with any of the following macros, they'll need
to be updated to their new names:
- defautoload! -> defcli-autoload!
- defgroup! -> defcli-group!
- defstub! -> defcli-stub!
- defalias! -> defcli-alias!
- defobsolete! -> defcli-obsolete!
These were renamed to make their relationship with CLIs more obvious;
they were too ambiguous otherwise.
Writing a debugger for Elisp is too much hassle. `debug` itself isn't
very customizable without a *lot* of boilerplate, so instead of writing
my own, it's more effective to advise debug instead. Certainly, I don't
do anything with it yet, but I will soon.
This allows us to load them via doom-require. Why not use normal
features? Because Doom's libraries are designed to be loaded as part of
Doom, and will openly rely on Doom state if needed; this is a contract I
want to enforce by ensuring their only entry points are through
`doom-require` or autoloading.
I will add them to the rest of the libraries later.
Site-node: this also adds Commentary+Code to the comment headings, as I
want a space to use that space to describe the library, when I get
around to it.
This is a regression from 948f946, where a bunch of mkdir calls were
removed prematurely. In v3, other processes are responsible for creating
these directories, but those haven't been implemented yet.
Fix: #6756
Amend: 948f9461a7
I prefer to be more explicit about these variables' defaults, then to
rely on proper load order and unverified global state to ensure they're
properly set.
This was done to purge superfluous files from Doom's project structure
and simplify its entry points. And with early-init.el now acting as
Doom's universal bootstrapper (see c05e615), we don't have enough
bootstrap logic to warrant being its own file.
Also removes the redundant version check, given doom.el is assured to be
loaded before doom-cli, and performs its own check.
Ref: c05e61536e
doom-etc-dir will be renamed to doom-data-dir, to better reflect its
purpose, and align it with XDG_DATA_HOME (where it will be moved to in
v3, where Doom will begin to obey XDG directory conventions more
closely).
BREAKING CHANGE: This restructures the project in preparation for Doom
to be split into two repos. Users that have reconfigured Doom's CLI
stand a good chance of seeing breakage, especially if they've referred
to any core-* feature, e.g.
(after! core-cli-ci ...)
To fix it, simply s/core-/doom-/, i.e.
(after! doom-cli-ci ...)
What this commit specifically changes is:
- Renames all core features from core-* to doom-*
- Moves core/core-* -> lisp/doom-*
- Moves core/autoloads/* -> lisp/lib/*
- Moves core/templates -> templates/
Ref: #4273
