BREAKING CHANGE: This commit replaces all-the-icons with nerd-fonts. Any
all-the-icons-* function calls or variable references in your private
config will break and should be replaced with their nerd-icons-*
equivalent. That said, Doom will continue to install all-the-icons for
a while, so feel free to load it if you don't want to fully commit to
the change yet.
This change is happening because nerd-icon has wider support for GUI and
TUI Emacs; has a larger, more consistent selection of symbols; plus unicode
coverage.
Fix: #7368Close: #6675Close: #7364
Includes a minor optimization: reading the current level from an
org-element object, rather than relying on (org-current-level), which
resorts to walking the buffer with regex.
Some psuedo module categories (like :core and :user) don't have a module
component. Rather than display them as ':core nil' or ':user nil' in
module listings (like doom/help-modules), omit the nil entirely.
Slipped by manual testing due to consult not being loaded at the time
and doom--help-search going to default grep-find usage instead of
hitting the failiure.
Amend: 54c4340740
This command would skip over consecutive package! statements in the
generated commit message. This commit fixes that.
That said, this command is still a temporary measure until formal bump
CI/CD is done, but should make dealing with doom/bumpify-diffs and
doom/commit-bumps a little less painful.
When calling backward-kill-word (which is in turn is calling kill-new),
not only kill-ring variable should be overridden, but also
kill-ring-yank-pointer.
Otherwise when deleting a word backwards, kill-ring pointer is moved and
next yank will insert (not so expected) rubbish.
Fix the handling of a nil path within doom/delete-this-file.
If path is nil (e.g. called interactively when buffer is not visiting a
file), avoid calling abbreviate-file-name on nil, otherwise an error
will be signaled:
(wrong-type-argument stringp nil)
Additionally, fix the subsequent path checks. These were treating two
distinct scenarios as a "Buffer is not visiting any file" user-error:
- nil path
- non-existent path
- Only the first should result in that error. The second should proceed
to the next path check (which was previously unreachable), to signal
the appropriate error, "File doesn't exist: %s".
This macro used to be `doom-with-context`, but was renamed in the middle
of backporting f9201eb218, but these references were missed.
Fix: #6849
Amend: f9201eb218
Doom is slowly transitioning away from requiring that its doom-*-dir
variables end in a slash (see two refs below), but there are some
vestiges of it left. This is one of them.
Fix: #6842
Ref: 00e8f6b72a
Ref: b914830403
The `if` clauses were swapped, such that a non-symlinked path was shown
like,
~/.config/emacs/ -> ~/.config/emacs/
and a symlinked path was shown as,
~/.config/emacs/
Where f9201eb introduced a general context system, this one introduces
one for modules, to simplify our let-bind game when interacting with
modules, and to more efficiently expose module state to modulep! (which
gets called at runtime a great deal, so its performance is important).
* lisp/doom-lib.el (doom-log): simplify macro and introduce
doom-inhibit-log variable.
* lisp/doom-modules.el (modulep!): fix reported file path if modulep!
fails to find the local module.
* lisp/lib/debug.el (doom-debug-variables): disable doom-inhibit-log
when debug mode is on.
Ref: f9201eb218
Introduces a system to announce what execution contexts are active, so I
can react appropriately, emit more helpful logs/warnings in the case of
issues, and throw more meaningful errors.
* bin/doom: load module CLIs in the 'modules' context.
* lisp/cli/doctor.el: load package files in 'packages' context.
* lisp/doom-cli.el:
- (doom-before-init-hook, doom-after-init-hook): trigger hooks at the
correct time. This may increase startup load time, as the benchmark
now times more of the startup process.
- (doom-cli-execute, doom-cli-context-execute,
doom-cli-context-restore, doom-cli-context-parse,
doom-cli--output-benchmark-h, doom-cli-call, doom-cli--restart,
doom-cli-load, run!): remove redundant context prefix in debug logs,
it's now redundant with doom-context, which doom-log now prefixes
them with.
* lisp/doom-lib.el (doom-log): prefix doom-context to doom-log output,
unless it starts with :.
* lisp/doom-packages.el (package!, doom-packages--read): throw error if
not used in a packages.el file or in the context of our package
manager.
* lisp/doom-profiles.el (doom-profile--generate-init-vars,
doom-profile--generate-load-modules): use modules doom-context instead
of doom-init-time to detect startup.
* lisp/doom-start.el (doom-load-packages-incrementally-h): move function
closer to end of doom-after-init-hook.
* lisp/doom.el:
- (doom-before-init-hook, doom--set-initial-values-h,
doom--begin-init-h): rename doom--set-initial-values-h to
doom--begin-init-h and ensure it runs as late in
doom-before-init-hook as possible, as that is the point where Doom's
"initialization" formally begins.
- (doom-after-init-hook): don't trigger at the end of command-line-1
in non-interactive sessions. This will be triggered manually in
doom-cli.el's run!.
* lisp/lib/config.el (doom/reload, doom/reload-autoloads,
doom/reload-env): use 'reload' context for reload commands.
* modules/lang/emacs-lisp/autoload.el (+emacs-lisp-eval): use 'eval'
context.
* modules/lang/org/config.el: remove doom-reloading-p; check for
'reload' doom context instead.
- Adds doom-module-packages-file and doom-module-metadata-file.
- Uses them and the other doom-module-*-file variables where they were
previously hardcoded.
- Add .el extension to doom-module-{init,config}-file; it is now the
consumer's responsibility to strip/change/keep the extension as they
see fit.
This introduces a depth field for modules so that they may dictate their
load order explicitly, it also treats depths <= -100 or >= 100 as
special depths, which will be loaded early, before their respective
doom-{before,after}-module-{init,config}-hook. This permits psuedo
modules like :core and :user modules to be treated as normal modules
without too many special cases.
This also fixes a module load order issue on Emacs 29 (#6813), caused by
emacs-mirror/emacs@4311bd0bd7, which changed the return value order of
hash-table-{keys,values} causing modules to be loaded in reverse order;
resulting in the loss of evil keybinds, among other things.
Other notable changes:
- Changes the data structure for module data caches from a list to a
vector. Uses less memory and permits faster lookups. Also adds two
depth fields to the front of it.
- Changes the signature of doom-module-list and doom-package-list.
- Renames doom--read-packages -> doom-packages--read for consistency
with naming convention.
- Add doom-module-depth function.
- Adds a temporary doom-core-dir/init.el file, which is responsible for
loading doom-*.el.
Fix: #6813
Ref: emacs-mirror/emacs@4311bd0bd7
- Batch more variables in Doom's autoloads files.
- Remove all the register-definition-prefixes calls generated in
autoloads files (for both modules' and packages' autoloads). These
don't serve much purpose, and only incur added cost growing a large
hash table.
What used to be a `byte-compiled-config` trait, displayed in your `M-x
doom/info`, is now `compiled-user-config`, `compiled-core`, and
`compiled-modules`, for more helpful granularity for debugging possible
byte-code issues.
Where they will be further generalized, later.
This also prevents an issue where org was loaded while the profile init
files are generated, which caused a warning about org-loaddefs which
introduces a noticable delay.
BREAKING CHANGE: For consistency and correctness, I've renamed the
module init/config hooks, and added new ones:
- Adds doom-before-modules-config-hook
- Adds doom-after-modules-config-hook (replaced doom-before-init-modules-hook)
- Adds doom-before-modules-init-hook
- Adds doom-after-modules-init-hook (replaced doom-init-modules-hook)
- Removed doom-after-init-modules-hook (replaced w/ after-init-hook)
The old naming (and timing) was counterintuitive. Now, it's named after
the loaded file group (init.el vs config.el), and I added before/after
variants. Altogether, this should make them less ambiguous.
I've also moved some functions in various modules to more correct hooks.
Load order before this change:
- $EMACSDIR/early-init.el
- $EMACSDIR/lisp/doom.el
- $EMACSDIR/lisp/doom-start.el
- $DOOMDIR/init.el
- {$DOOMDIR,~/.emacs.d}/modules/*/*/init.el
- `doom-before-init-modules-hook'
- {$DOOMDIR,~/.emacs.d}/modules/*/*/config.el
- `doom-init-modules-hook'
- $DOOMDIR/config.el
- `doom-after-init-modules-hook'
- `after-init-hook'
- `emacs-startup-hook'
- `window-setup-hook'
Load order after this change:
- $EMACSDIR/early-init.el
- $EMACSDIR/lisp/doom.el
- $EMACSDIR/lisp/doom-start.el
- $DOOMDIR/init.el
- `doom-before-modules-init-hook'
- {$DOOMDIR,~/.emacs.d}/modules/*/*/init.el
- `doom-after-modules-init-hook'
- `doom-before-modules-config-hook'
- {$DOOMDIR,~/.emacs.d}/modules/*/*/config.el
- `doom-after-modules-config-hook'
- $DOOMDIR/config.el
- `after-init-hook'
- `emacs-startup-hook'
- `window-setup-hook'
...that are always enabled. This way, the module API treats them as any
other module.
This also changes doom-module-load-path. If supplied directories,
doom-user-dir will not be the CAR of its return value. If no dirs are
supplied, then doom-core-dir and doom-user-dir are included (and will
always be the first two items in the returned list).
