consult--grep-lookahead-p throws an error if argv[0] can't be found, and
so will require if consult isn't installed (which would be redundant
with the package checks the doctor already does). To prevent misleading
backtraces here, I've suppressed the latter issue, but the former will
need attention later.
Doom replaces `org-insert-heading`, but its replacement does not respect
`org-insert-heading-hook`. This commit fixes that, enabling folks to
customize their insert-heading behavior, e.g. adding a time stamp:
(defun my/org-set-creation-date-heading-property ()
(save-excursion
(org-back-to-heading)
(org-set-property "CREATED" (format-time-string "[%Y-%m-%d %T]"))))
(add-hook 'org-insert-heading-hook #'my/org-set-creation-date-heading-property)
Ref: https://git.savannah.gnu.org/cgit/emacs/org-mode.git/tree/lisp/org.el#n6187
Ref: https://git.savannah.gnu.org/cgit/emacs/org-mode.git/tree/lisp/org.el#n1615
Where they will be further generalized, later.
This also prevents an issue where org was loaded while the profile init
files are generated, which caused a warning about org-loaddefs which
introduces a noticable delay.
Overriding `ivy--flx-featurep` here would always prevent flx from being
loaded and enabled---even if it were `t`---because ivy `require`s it in
`ivy--flx-featurep`'s initvalue. So instead, this sets the variable if
and only if it should be disabled. Because flx isn't installed when
+prescient is enabled, I've included that in the condition for disabling
ivy--flx-featurep as well
Fix: https://github.com/doomemacs/doomemacs/issues/6034
Amend: bae7ab0d8d
Moves this from doom-ui to doom-start, since there is more savings to be
had if this is done early.
Also moves the menu-bar fix for macos out of the :os macos module into
doom-start, because it is a fix (and for a Doom optimization) and not a
feature, so it shouldn't be behind a module.
BREAKING CHANGE: For consistency and correctness, I've renamed the
module init/config hooks, and added new ones:
- Adds doom-before-modules-config-hook
- Adds doom-after-modules-config-hook (replaced doom-before-init-modules-hook)
- Adds doom-before-modules-init-hook
- Adds doom-after-modules-init-hook (replaced doom-init-modules-hook)
- Removed doom-after-init-modules-hook (replaced w/ after-init-hook)
The old naming (and timing) was counterintuitive. Now, it's named after
the loaded file group (init.el vs config.el), and I added before/after
variants. Altogether, this should make them less ambiguous.
I've also moved some functions in various modules to more correct hooks.
Load order before this change:
- $EMACSDIR/early-init.el
- $EMACSDIR/lisp/doom.el
- $EMACSDIR/lisp/doom-start.el
- $DOOMDIR/init.el
- {$DOOMDIR,~/.emacs.d}/modules/*/*/init.el
- `doom-before-init-modules-hook'
- {$DOOMDIR,~/.emacs.d}/modules/*/*/config.el
- `doom-init-modules-hook'
- $DOOMDIR/config.el
- `doom-after-init-modules-hook'
- `after-init-hook'
- `emacs-startup-hook'
- `window-setup-hook'
Load order after this change:
- $EMACSDIR/early-init.el
- $EMACSDIR/lisp/doom.el
- $EMACSDIR/lisp/doom-start.el
- $DOOMDIR/init.el
- `doom-before-modules-init-hook'
- {$DOOMDIR,~/.emacs.d}/modules/*/*/init.el
- `doom-after-modules-init-hook'
- `doom-before-modules-config-hook'
- {$DOOMDIR,~/.emacs.d}/modules/*/*/config.el
- `doom-after-modules-config-hook'
- $DOOMDIR/config.el
- `after-init-hook'
- `emacs-startup-hook'
- `window-setup-hook'
This adds the basic framework of docs/examples.org, including the former
contents of demo.org in :lang emacs-lisp. elisp-demo has also been
reconfigured to search it instead.
Keep in mind that examples.org references a few things in as-of-yet
published documentation. This will be rectified soon.
This was adapted from
https://www.reddit.com/r/emacs/comments/d7x7x8/finally_fixing_indentation_of_quoted_lists/.
It fixes the indentation of quoted data (and plist keywords) so they're
indented like data, rather than function arguments, like so:
BEFORE:
`(foo bar baz
doom emacs)
'(:foo 1
:bar 2
:baz 3)
'(:foo 1
2
3
:bar 4)
(:foo 1
:bar 2)
(:foo 1
;; test comment
:bar 2)
(:foo 1
2
:bar 3)
AFTER:
`(foo bar baz
doom emacs)
'(:foo 1
:bar 2
:baz 3)
'(:foo 1
2
3
:bar 4)
;; only align unquoted keywords if keywords start each line:
(:foo 1
:bar 2)
(:foo 1
;; test comment
:bar 2)
(:foo 1
2
:bar 3)
Also, I added a way to declare that plists in an macro's arguments
should be indented like data:
(put 'map! 'indent-plists-as-data t)
BEFORE:
(map! :localleader
:map emacs-lisp-mode-map
(:prefix ("d" . "debug")
"f" #'+emacs-lisp/edebug-instrument-defun-on
"F" #'+emacs-lisp/edebug-instrument-defun-off))
AFTER:
(map! :localleader
:map emacs-lisp-mode-map
(:prefix ("d" . "debug")
"f" #'+emacs-lisp/edebug-instrument-defun-on
"F" #'+emacs-lisp/edebug-instrument-defun-off))
There was a third improvement I was hoping to include, namely,
proper indentation of interpolated forms:
BEFORE:
`(foo
bar
,(if t
'baz
'boo))
`(foo
bar
(if t
baz
boo))
AFTER:
`(foo
bar
,(if t
'baz
'boo))
`(foo
bar
(if t
baz
boo))
But this was removed because it breaks indentation for quoted macro
forms (or dynamic elisp programming):
BEFORE: (good)
`(with-temp-buffer
(if (always)
(message
"Hello %s"
user-login-name)
(message
"Goodbye %s"
user-login-name)))
AFTER: (bad)
`(with-temp-buffer
(if (always)
(message
"Hello %s"
user-login-name)
(message
"Goodbye %s"
user-login-name)))
Ref: https://www.reddit.com/r/emacs/comments/d7x7x8/finally_fixing_indentation_of_quoted_lists/'
BREAKING CHANGE: This performs the following backwards-incompatible
changes:
- Replaces `+emacs-lisp-reduce-flycheck-errors-in-emacs-config-h` with a
`+emacs-lisp-non-package-mode` minor-mode.
- Removed the `+emacs-lisp-disable-flycheck-in-dirs` variable, as this
mechanism no longer checks a directory list to detect a "non-package".
If you've referenced either of these symbols, you'll need to
update/remove them from your config. No extra config is needed
otherwise.
Why: Doom has always tried to reduce the verbosity of Flycheck when
viewing elisp config files or scripts (i.e. non-packages). These are so
stateful that the byte-compiler, package-lint, and checkdoc inundate
users with false positives that are more overwhelming than helpful.
The heuristic for this has always been a simple "is this file in
$DOOMDIR or $EMACSDIR", but this wasn't robust enough, especially in
cases where symlinking was involved, so I've employed a new, more
general heuristic for detecting non-package files:
- The file isn't a theme in `custom-theme-load-path`,
- The file doesn't have a (provide ...) or (provide-theme ...)
statement whose first argument matches the file name,
- The file lives in a project with a .doommodule file (doom modules
never have convention package files in them),
- Or the file is a dotfile (like .dir-locals.el or .doomrc).
I've also tweaked byte-compile-warnings to yield a little more output,
but not by much. Whether this is too permissive or not will require
further testing to determine.
What's more, I've updated this to reflect recent changes to Doom's
startup process (in c05e615).
Ref: c05e61536e
With mu4e came a new face for the header view. While this is nice for
the text, it had the consequence of making the account stripe (the
vertical bar) a bit jarring. This patch fixes that behavior to make the
stripe non-italic by append `'default` to the face.
The nix-mode package already does this and it shadows other entries for the .drv files in auto-mode-alist (namely Guix derivations).
Ref: 34d51e2731/nix-drv-mode.el (L48)
6c0b7e1 introduced a new convention for CLIs defined by Doom's modules:
to namespace them under `doom +MODULE ...`. What was once 'doom
everywhere' is now 'doom +everywhere', so the docs needed correcting.
Ref: 6c0b7e1530
BREAKING CHANGE: Racer is no longer developed and its project page
recommends using rust-analyzer instead. Moreover, users have reported
issues trying to build/install it on recent versions of rust, so I've
removed support for Racer from Doom, and now default solely to LSP for
IDE features.
Users that want these features will need to activate the module's +lsp
flag (along with the :tools lsp module) and install rust-analyzer. See
the module's README for instructions.
Close: #6705
Co-authored-by: c1ttim <c1ttim@users.noreply.github.com>
The documentation claimed that epdinfo will be built as soon as a pdf
file is opened. However, support for automatically building epdfinfo was
removed in the commit referenced below.
Ref: daa50557a4
There are some conventional files strongly associated with a non-bash
shell which do not use an explicit `.zsh` file extension (e.g.
`.zprofile`); the old logic would always use the `#!/usr/bin/env bash`
shebang in these cases, which is a tiny little bummer.
doom-etc-dir will be renamed to doom-data-dir, to better reflect its
purpose, and align it with XDG_DATA_HOME (where it will be moved to in
v3, where Doom will begin to obey XDG directory conventions more
closely).
- Deprecates the doom-private-dir variable in favor of doom-user-dir.
- Renames the pseudo category for the user's module: :private -> :user.
- Renames the doom-private-error error type to doom-user-error.
Emacs uses the term "user" to refer to the "things" in user space (e.g.
user-init-file, user-emacs-directory, user-mail-address, xdg-user-dirs,
package-user-dir, etc), and I'd like to be consistent with that. It also
has the nice side-effect of being slightly shorter. I also hope
'doom-user-error' will be less obtuse to beginners than
'doom-private-error'.
